Nitrogen Source Research Articles

Rapidly rotating Population III stellar models as a source of primary nitrogen

The first stars might have been fast rotators. This would have important consequences for their radiative, mechanical, and chemical feedback. We discuss the impact of fast initial rotation on the evolution of massive Population III models and on their nitrogen and oxygen stellar yields. We explore the evolution of Population III stars with initial masses in the range of 9 msol ini msol starting with an initial rotation on the zero-age main sequence equal to 70<!PCT!> of the critical one. We find that with the physics of rotation considered here, our rapidly rotating Population III stellar models do not follow a homogeneous evolution. They lose very little mass in the case in which mechanical winds are switched on when the surface rotation becomes equal to or larger than the critical velocity. The impact on the ionising flux appears to be modest when compared to moderately rotating models. Fast rotation favours, in models with initial masses above sim 20 msol the appearance of a very extended intermediate convective zone around the H-burning shell during the core He-burning phase. This shell has important consequences for the sizes of the He- and CO-cores, and thus impacts the final fate of stars. Moreover, it has a strong impact on nucleosynthesis, boosting the production of primary 14N. Fast initial rotation significantly impacts the chemical feedback of Population III stars. Observations of extremely metal-poor stars and/or starbursting regions are essential to provide constraints on the properties of the first stars.

Restoration of the soil fertility under Cr(VI) and artificial drought condition by the utilization of plant growth-promoting Bacillus spp. SSAU2.

The study explores the potential of an indigenous halo-tolerant microbe identified as Bacillus spp. SSAU-2 in enhancing soil fertility and promoting plant growth for sustainable agricultural practices under the influence of multiple abiotic stresses such as Cr(VI), high salinity, and artificial drought condition. The study investigated various factors influencing IAA synthesis by SSAU-2, such as pH (5 to 11), salinity (10 to 50g/L), tryptophan concentration (0.5 to 1%), carbon (mannitol mand lactose), and nitrogen sources (peptone and tryptone). The highest IAA concentration was observed at pH 10 (1.695mg/ml) and pH 11 (0.782mg/ml). IAA synthesis was optimized at a salinity level of 30g/l, with lower and higher salinity levels resulting in decreased IAA concentrations. Notably, the presence of mannitol and lactose significantly augmented IAA synthesis, while glucose and sucrose had inhibitory effects. Furthermore, peptone and tryptone played a pivotal role in enhancing IAA synthesis, while ammonium chloride exerted an inhibitory influence. SSAU-2 showed a diverse array of capabilities, including the synthesis of gibberellins, extracellular polymeric substances, siderophores, and hydrogen cyanide along with nitrogen fixation and ammonia production. The microbe could efficiently tolerate 45% PEG-6000 concentration and effectively produce IAA in 15% PEG concentration. It could also tolerate high concentration of Cr(VI) and synthesize IAA even in 50ppm Cr(VI). The findings of this study provide valuable insights into harnessing the potential of indigenous microorganisms to promote plant growth, enhance soil fertility, and establish sustainable agricultural practices essential for restoring the health of ecosystems.

Isolation of a facultative methanotroph Methylocystis iwaonis SD4 from rice rhizosphere and establishment of rapid genetic tools for it.

Methanotrophs of the genus Methylocystis are frequently found in rice paddies. Although more than ten facultative methanotrophs have been reported since 2005, none of these strains was isolated from paddy soil. Here, a facultative methane-oxidizing bacterium, Methylocystis iwaonis SD4, was isolated and characterized from rhizosphere samples of rice plants in Nanjing, China. This strain grew well on methane or methanol but was able to grow slowly using acetate or ethanol. Moreover, strain SD4 showed sustained growth at low concentrations of methane (100 and 500ppmv). M. iwaonis SD4 could utilize diverse nitrogen sources, including nitrate, urea, ammonium as well as dinitrogen. Strain SD4 possessed genes encoding both the particulate methane monooxygenase and the soluble methane monooxygenase. Simple and rapid genetic manipulation methods were established for this strain, enabling vector transformation and unmarked genetic manipulation. Fast growth rate and efficient genetic tools make M. iwaonis SD4 an ideal model to study facultative methanotrophs, and the ability to grow on low concentration of methane implies its potential in methane removal.

Large Flux Supply of NAD(H) under Aerobic Conditions by Candida glycerinogenes.

NAD is a redox coenzyme and is the center of energy metabolism. In metabolic engineering modifications, an insufficient NAD(H) supply often limits the accumulation of target products. In this study, Candida glycerinogenes was found to be able to supply NAD(H) in large fluxes, up to 7.6 times more than Saccharomyces cerevisiae in aerobic fermentation. Aerobic fermentation in a medium without amino nitrogen sources demonstrated that C. glycerinogenes NAD synthesis was not dependent on NAD precursors in the medium. Inhibition by antisense RNA and the detection of transcript levels indicated that the main NAD supply pathway is the de novo biosynthesis pathway. It was further demonstrated that NAD(H) supply was unaffected by changes in metabolic flow through C. glycerinogenes ΔGPD aerobic fermentation (80 g/L ethanol). In conclusion, the ability of C. glycerinogenes to supply NAD(H) in large fluxes provides a new approach to solving the NAD(H) supply problem in synthetic biology.

Optimization studies on laccase activity of Proteus mirabilis isolated from treatment sludge of textile industry factories : Optimization of laccase activity of Proteus mirabilis.

Laccase is an exothermic enzyme with copper in its structure and has an important role in biodegradation by providing oxidation of phenolic compounds and aromatic amines and decomposing lignin. The aim of this study is to reach maximum laccase enzyme activity with minimum cost and energy through optimization studies of Proteusmirabilis isolated from treatment sludge of a textile factory. In order to increase the laccase enzyme activities of the isolates, medium and culture conditions were optimized with the study of carbon (Glucose, Fructose, Sodium Acetate, Carboxymethylcellulose, Xylose) and nitrogen sources (Potassium nitrate, Yeast Extract, Peptone From Soybean, Bacteriological Peptone), incubation time, pH, temperature and Copper(II) sulfate concentration then according to the results obtained. Response Surface Method (RSM) was performed on six different variables with three level. According to the data obtained from the RSM, the maximum laccase enzyme activity is reached at pH 7.77, temperature 30.03oC, 0.5g/L CuSO4, 0.5g/L fructose and 0.082g/L yeast extract conditions. After all, the laccase activity increased 2.7 times. As a result, laccase activity of P. mirabilis can be increased by optimization studies. The information obtained as a result of the literature studies is that the laccase enzymes produced in laboratory and industrial scale are costly and their amounts are low. This study is important in terms of obtaining more laccase activity from P.mirabilis with less cost and energy.

Amidoximated‐Wood Derived Carbons as Advanced Self‐Standing Electrodes for Supercapacitor and Water Splitting

AbstractWood‐derived carbons demonstrate great potential as self‐standing electrodes in energy storage/conversion applications, including supercapacitors and water‐splitting devices. However, the key challenge remains the rational customization of surface functionalities for optimized performance. This study introduces an innovative approach to self‐standing wood‐derived carbons with tailored nitrogen and metal functionalities. In contrast to traditional impregnation techniques, which offer limited precision in surface modification, this approach entails the intentional attachment of amidoxime groups to the wood substrates. These groups serve as nitrogen sources, and create abundant surface anchoring sites for metal ions due to the chelation between the amidoxime groups and metals. The resulting carbons feature uniform and high dispersion of nitrogen and metal functionalities, along with a distinctive hierarchical porosity combining interconnected open channels with abundant mesopores. As a proof‐of‐concept, different metals are incorporated (i.e., Mn, Co, Ni) into the amidoximated‐wood precursors, and the resulting self‐standing carbons showcase excellent performance in both supercapacitors and water‐splitting applications. Leveraging the specific chelating ability of amidoxime groups toward metal ions, this strategy holds great potential as a generic approach to systematically tailoring the surface functionalities of carbon‐based materials for various electrochemical energy storage/conversion processes.

Rhizobia–diatom symbiosis fixes missing nitrogen in the ocean

Rhizobia–diatom symbiosis fixes missing nitrogen in the ocean

Isolation, characterization and optimization of oleaginous Providencia vermicola as a feedstock for biodiesel production using Response Surface Methodology

Oleaginous organisms accrue more than twenty percent of their biomass as lipids and hence are promising feedstocks for biodiesel production. In this study, lipid accumulating bacteria were isolated from diesel-contaminated soils and screened with Sudan black B stain. The most oleaginous was done using 16s rRNA gene sequencing. Lipid production was initially optimized based on media, nitrogen source, pH and temperature. Response surface methodology (RSM) was then employed for the enhancement of lipid weight and content. Obtained lipid was converted to biodiesel using direct transesterification, and both lipid and biodiesel were characterized using FTIR. A total of thirteen bacteria were isolated and the most prominent lipid producer was identified as Providencia vermicola with lab number BA6. Preliminary optimization studies revealed optimum lipid production when nutrient broth and acetic acid served as carbon source; KNO3 as nitrogen source, pH 7.0 and 30 °C. Optimization using RSM resulted in a 5.1% and 74.1% increase in the biomass and lipid content of BA6 respectively. FTIR analyses confirmed the presence of functional groups characteristic of lipids and biodiesel. P. vermicola is a novel oleaginous organism that represents a promising feedstock for biodiesel production. HIGHLIGHTS The bacterium designated as BA6 identified as Providencia vermicola has the highest lipid contents of the oleaginous bacteria isolated. It accumulates lipids up to 47.73 % of its biomass The percentage lipids accumulation increased to about 74 % when RSM was used. Providencia vermicola is being reported as an oleaginous organism for the first time.

Real-time and specific monitoring of nitric oxide and evaluating of the oxidative stress in living cells and zebrafish under the pollutant exposure using a carbon dot-based composite fluorescent probe

Nitric oxide (NO) functions as an essential signalling molecule in various physiological and pathological pathways. In vitro and vivo redox processes mediated by reactive oxygen species (ROS) and nitric oxide (NO) directly influence the intracellular state. In this study, a red-emitting fluorescent nanoprobe, N,S-CDs@Zn-ICA, was synthesized to monitor NO fluctuations in living cells and zebrafish under the exposure to various pollutants. Red-emissive carbon dots (N,S-CDs) were synthesized by a hydrothermal method using o-phenylenediamine and urea as carbon / nitrogen sources, and H2SO4 as sulfur source. Glutathione (GSH) was introduced to link N,S-CDs with metal organic complexes (Zn-ICA) through an amidation reaction to fabricate a carbon dot-based composite fluorescent probe, which greatly improved the selectivity, stability, and response time of the N,S-CDs. The composite probe has high selectivity and sensitivity with limit of detection (LOD) of 96.0 nM. Furthermore, the proposed probe was successfully used to monitor the dynamic changes in NO levels and evaluate oxidative stress in MCF-7 cells and zebrafish under the exposure to various pollutants, including seven heavy metal ions (such as Pb2+, Cd2+, and Hg2+) and nine organic pollutants at different concentrations and exposure times. This work provides a novel strategy for constructing highly selective and red-emitting fluorescent probe for real-time and dynamic monitoring of NO and further evaluating oxidative stress induced by pollutants in vitro and in vivo via fluorescence imaging.

Optimization of fermentation conditions for the production of γ-aminobutyric acid by Lactobacillus hilgardii GZ2 from traditional Chinese fermented beverage system.

γ-Aminobutyric acid (GABA) is a crucial neurotransmitter with wide application prospects. In this study, we focused on a GABA-producing strain from a traditional Chinese fermented beverage system. Among the six isolates, Lactobacillus hilgardii GZ2 exhibited the greatest ability to produce GABA in the traditional Chinese fermented beverage system. To increase GABA production, we optimized carbon sources, nitrogen sources, temperature, pH, and monosodium glutamate and glucose concentrations and conducted fed-batch fermentation. The best carbon and nitrogen sources for GABA production and cell growth were glucose, yeast extract and tryptone. Gradual increases in GABA were observed as the glucose and monosodium glutamate concentrations increased from 10g/L to 50g/L. During fed-batch fermentation, lactic acid was used to maintain the pH at 5.56, and after feeding with 0.03g/mL glucose and 0.4g/mL sodium glutamate for 72h, the GABA yield reached 239g/L. This novel high-GABA-producing strain holds great potential for the industrial production of GABA, as well as the development of health-promoting functional foods and medical fields.

Nitrided Copper-Iron Composite Oxides Derived from Layered Double Hydroxides for Enhanced Carbon Dioxide Electroreduction to Methane and Formic Acid

The reduction of carbon dioxide to valuable chemical products is a promising solution to address carbon balance and energy issues. Herein, amorphous nitrided copper-iron oxides are prepared by gas-phase nitriding of CuFe-layered double hydroxide precursors with urea as nitrogen source. Amorphous materials are more likely to generate defect vacancies during the reaction process, and these vacancies can function as active sites for catalytic reactions. Therefore, the obtained materials show high activity for CO2 electroreduction to methane and formic acid, achieving a total Faraday efficiency of 74.7% at −0.7 V vs RHE and exhibiting a continuous 10 h durability in the H-cell. The uniformly distributed Cu+ sites act as active sites by losing electrons to activate CO2. During the CO2 electroreduction, CO2 is converted to *COOH via proton-electron coupling, *COOH combines directly with a proton in solution to produce the HCOOH product, and the other part of *COOH undergoes a protonated dehydration process to form the *CHO intermediate which dehydrates again to form CH4. This study provides a new approach for designing CO2 electroreduction catalysts.

Ethanolamine enhances adhesion, promotes microcompartment formation, and modulates gene expression in Levilactobacillus brevis ATCC 14869

ABSTRACT Ethanolamine is an abundant compound in the gastrointestinal tract and a valuable source of carbon and nitrogen for pathogenic bacteria harboring ethanolamine utilization (eut) genes. Eut-positive pathogens can consume free ethanolamine to outcompete commensal microbes, which often lack eut genes, and establish infection. Ethanolamine can also act as a host recognition signal for eut-positive pathogens to upregulate virulence genes during colonization. Therefore, reducing free ethanolamine titers may represent a novel approach to preventing infection by eut-positive pathogens. Interestingly, the commensal microorganism Levilactobacillus brevis ATCC 14869 was found to encode over 18 eut genes within its genome. This led us to hypothesize that L. brevis can compete with eut-positive pathogens by clearing free ethanolamine from the environment. Our results demonstrate that despite being unable to metabolize ethanolamine under most conditions, L. brevis ATCC 14869 responds to the compound by increasing the expression of genes encoding proteins involved in microcompartment formation and adhesion to the intestinal epithelial barrier. The improved intestinal adhesion of L. brevis in the presence of ethanolamine also enhanced the exclusion of eut-positive pathogens from adhering to intestinal epithelial cells. These findings support further studies to test whether L. brevis ATCC 14869 can counter enteric pathogens and prevent or reduce the severity of infections. Overall, the metabolic capabilities of L. brevis ATCC 14869 offer a unique opportunity to add to the armamentarium of antimicrobial therapies as well as our understanding of the mechanisms used by beneficial microbes to sense and adapt to host microenvironments.

Enhanced Production of Erythritol from Glucose by the Newly Obtained UV Mutant Yarrowia lipolytica K1UV15

Erythritol is a polyol with a sweet taste but low energy value. Thanks to its valuable properties, as well as growing social awareness and nutritional trends, its popularity is growing rapidly. The aim of this study was to increase the effectiveness of erythritol production from glucose using new UV mutants of the yeast Yarrowia lipolytica obtained in the Wratislavia K1 strain. The ability of the new strains to biosynthesize erythritol and utilize this polyol was examined in shake-flask cultures and fed-batch processes conducted in a stirred tank reactor with a total glucose concentration of 300 and 400 g/L. The Wratislavia K1 strain produced erythritol most efficiently (97.5 g/L; 192 h) at an initial glucose concentration of 250 g/L (total: 300 g/L). New strains were assessed under such conditions, and it was noted that the highest erythritol concentration (145 g/L; 183 h) was produced by the K1UV15 strain. A significant improvement in the erythritol biosynthesis efficiency (148 g/L; 150 h) was achieved upon the increase in (NH4)2SO4 to 3.6 g/L. Further, in the culture with such a concentration of the nitrogen source and increased total glucose level (400 g/L), the K1UV15 strain produced 226 g/L of erythritol within 281 h.

Association between organic nitrogen substrates and the optical purity of d-lactic acid during the fermentation by Sporolactobacillus terrae SBT-1

The development of biotechnological lactic acid production has attracted attention to the potential production of an optically pure isomer of lactic acid, although the relationship between fermentation and the biosynthesis of highly optically pure d-lactic acid remains poorly understood. Sporolactobacillus terrae SBT-1 is an excellent d-lactic acid producer that depends on cultivation conditions. Herein, three enzymes responsible for synthesizing optically pure d-lactic acid, including d-lactate dehydrogenase (D-LDH; encoded by ldhDs), l-lactate dehydrogenase (L-LDH; encoded by ldhLs), and lactate racemase (Lar; encoded by larA), were quantified under different organic nitrogen sources and concentration to study the relationship between fermentation conditions and synthesis pathway of optically pure lactic acid. Different organic nitrogen sources and concentrations significantly affected the quantity and quality of d-lactic acid produced by strain SBT-1 as well as the synthetic optically pure lactic acid pathway. Yeast extract is a preferred organic nitrogen source for achieving high catalytic efficiency of d-lactate dehydrogenase and increasing the transcription level of ldhA2, indicating that this enzyme plays a major role in d-lactic acid formation in S. terrae SBT-1. Furthermore, lactate racemization activity could be regulated by the presence of d-lactic acid. The results of this study suggest that specific nutrient requirements are necessary to achieve a stable and highly productive fermentation process for the d-lactic acid of an individual strain.

Synthesis and characterisation of K2CO3-activated carbon produced from distilled spent grains for the adsorption of CO2.

Activated carbon was prepared from distilled spent grains (DSG) using K2CO3 activation and chitosan modification. The effects of activator dosage, activation temperature, and the incorporation of chitosan as a nitrogen source on the adsorption performance were studied in this paper. The activated carbons were characterised by scanning electron microscopy, X-ray photoelectron spectroscopy, and nitrogen and carbon dioxide gas adsorption. Under the optimal conditions, the BET-specific surface area, total pore volume, and microporous volume of the activated carbon were as high as 1142 m2/g, 0.62 cm3/g, and 0.40 cm3/g, respectively. Chitosan was used as the nitrogen source, and surface modification was carried out concurrently with the K2CO3 activation process. The results revealed a carbon dioxide adsorption capacity of 5.2 mmol/g at 273.15 K and 1 bar without a nitrogen source, which increased to 5.76 mmol/g after chitosan modification. The isosteric heat of adsorption of CO2 all exceed 20 kJ/mol, hinting at the coexistence of both physisorption and chemisorption. The adsorption behaviour of the DSG-based activated carbon can be well-described by the Freundlich model.

Ethanolamine metabolism through two genetically distinct loci enables Klebsiella pneumoniae to bypass nutritional competition in the gut.

Successful microbial colonization of the gastrointestinal (GI) tract hinges on an organism's ability to overcome the intense competition for nutrients in the gut between the host and the resident gut microbiome. Enteric pathogens can exploit ethanolamine (EA) in the gut to bypass nutrient competition. However, Klebsiella pneumoniae (K. pneumoniae) is an asymptomatic gut colonizer and, unlike well-studied enteric pathogens, harbors two genetically distinct ethanolamine utilization (eut) loci. Our investigation uncovered unique roles for each eut locus depending on EA utilization as a carbon or nitrogen source. Murine gut colonization studies demonstrated the necessity of both eut loci in the presence of intact gut microbiota for robust GI colonization by K. pneumoniae. Additionally, while some Escherichia coli gut isolates could metabolize EA, other commensals were incapable, suggesting that EA metabolism likely provides K. pneumoniae a selective advantage in gut colonization. Molecular and bioinformatic analyses unveiled the conservation of two eut loci among K. pneumoniae and a subset of the related taxa in the K. pneumoniae species complex, with the NtrC-RpoN regulatory cascade playing a pivotal role in regulation. These findings identify EA metabolism as a critical driver of K. pneumoniae niche establishment in the gut and propose microbial metabolism as a potential therapeutic avenue to combat K. pneumoniae infections.

Heavy metal application of response surface optimized-lipopeptide biosurfactant produced by Pseudomonas aeruginosa strain CGA-02 in low-cost substrate

Cost-effective methods of biosurfactant production with minimal environmental impact are needed as global demand continues to increase. This study evaluated lipopeptide biosurfactant production in a Pseudomonas aeruginosa strain CGA-02 using a low-cost carbon substrate. The structural properties of the biosurfactant and applicability of the biosurfactant in heavy metal removal were evaluated. Response surface methodology (RSM) involving central composite design (CCD) was used to optimize process parameters to maximize biosurfactant production. The study identified sugar cane molasses and sodium nitrate as carbon and nitrogen sources of choice for bacterial growth and biosurfactant production, with a relatively 2.64-fold increase in biosurfactant yield under optimized conditions. Analysis of the biosurfactant measured a surface tension reduction of water from 72.2 ± 0.26 to 30.5 ± 0.2 mN/m at 40 mg/L critical micelle concentration. GC–MS and FTIR analysis revealed structural properties of the lipopeptide biosurfactant, with fatty acid components predominantly 9-octadecenoic acid (oleic acid), n-hexadecanoic acid, cyclotetrasiloxane and trimyristin, and infrared peaks belonging to amine, carboxyl, nitrile, alkanol, ether and carbonyl groups. Capture of heavy metals using the biosurfactant was evaluated in soil microcosms. Removal rates of 80.47, 100, 77.57, 100, and 97.57% were recorded for As, Pb, Hg, Cd and Cr respectively after 12 weeks of incubation. There was no significant difference (p < 0.05) in the removal efficiency of the biosurfactant and an analogous chemical surfactant, sodium dodecyl sulphate. First and second-order kinetic models described heavy metal removal rates by the biosurfactant. We demonstrate the production of a useful biosurfactant using low-cost waste carbon.

Bifunctional effects of nitrogen-doped carbon quantum dots on CoS2/mesoporous carbon composites for high-performance lithium-ion batteries

Cobalt disulfide (CoS2) stands as a promising candidate for anode materials in lithium-ion batteries due to its high theoretical capacity, but it faces challenges associated with the shuttle effect of lithium polysulfide during cycling. To address these issues, zeolitic imidazolate framework (ZIF)-derived composites have been extensively explored because of distinct advantages such as the formation of nano-sized particles, heteroatom doping, and highly porous structures. However, ZIF-derived carbon supports primarily consist of ultra-micropores that can impede lithium-ion diffusion. Herein, we aimed to enhance cycling stability by introducing a nitrogen-doped carbon quantum dot (NCQD) solution derived from N-methyl-2-pyrrolidone into cobalt-based ZIF-67 to modify the porosity and dope heteroatoms of CoS2 nanoparticle-embedded heteroatom-doped carbon composites (CoS2/NSC). The mildly acidic NCQD solution resulted in the partial etching of the ZIF-67 structure, along with the deposition of NCQDs as a nitrogen source. Notably, the pore sizes could be adjusted by varying the concentration of the NCQD solution, while retaining the nitrogen functional groups during carbonization. The electrode using CoS2/NSC with the 2.8 mL NCQD pre-treatment exhibited enhanced C-rate capability with the capacity of 392 mAh/g at 2.0 A/g. Moreover, the cycling stability was improved, with a capacity retention of 77 % after 100 cycles.

Optimization of Fermentation Culture Medium for Sanghuangporus alpinus Using Response-Surface Methodology

The newly identified Sanghuangporus alpinus species of the Sanghuang mushroom genus has been found to possess significant medical benefits. However, the current artificial cultivation technology has not reached the requisite maturity. The response-surface methodology (RSM) was used to optimize the Sanghuangporus alpinus culture medium formulation and evaluate the functional activity of S. alpinus exopolysaccharides. First, a single-factor experiment was conducted to screen for optimal carbon and nitrogen sources for S. alpinus. Then, using Box–Behnken’s central composite design, a response-surface experiment was conducted to determine optimal culture parameters. Finally, the rationality of those parameters was assessed in a shaking flask experiment. The optimal culture parameters, determined through regression analysis, were 20.20 ± 0.17 g/L fructose (carbon source), 7.29 ± 0.10 g/L yeast extract (nitrogen source), and 0.99 ± 0.01 g/L dandelion. With optimization, the S. alpinus yield increased to 12.79 ± 1.41 g/L, twice that obtained from the initial culture medium. The S. alpinus exopolysaccharide exhibited an excellent antioxidant capacity, with the strongest scavenging effect noted on ABTS free radicals (lowest half-inhibitory concentration: 0.039 mg/mL). Additionally, this exopolysaccharide effectively inhibited various cancer cells, exhibiting the strongest activity against human glioma cells U251 (half-inhibitory concentration: 0.91 mg/mL). The RSM used to optimize the fermentation culture parameters of S. alpinus significantly increased the mycelial biomass. The improvement of Sanghuangporus alpinus yield through liquid fermentation and optimizing the fermentation medium could fill the existing gap in the cultivation of Sanghuangporus alpinus, as well as provide valuable data for the large-scale production of S. alpinus.

Methylotrophic bacteria from rice paddy soils: mineral-nitrogen-utilizing isolates richness in bulk soil and rhizosphere.

Methanol, the second most abundant volatile organic compound, primarily released from plants, is a major culprit disturbing atmospheric chemistry. Interestingly, ubiquitously found methanol-utilizing bacteria, play a vital role in mitigating atmospheric methanol effects. Despite being extensively characterized, the effect of nitrogen sources on the richness of methanol-utilizers in the bulk soil and rhizosphere is largely unknown. Therefore, the current study was planned to isolate, characterize and explore the richness of cultivable methylotrophs from the bulk soil and rhizosphere of a paddy field using media with varying nitrogen sources. Our data revealed that more genera of methylotrophs, including Methylobacterium, Ancylobacter, Achromobacter, Xanthobacter, Moraxella, and Klebsiella were enriched with the nitrate-based medium compared to only two genera, Hyphomicrobium and Methylobacterium, enriched with the ammonium-based medium. The richness of methylotrophic bacteria also differed substantially in the bulk soil as compared to the rhizosphere. Growth characterization revealed that majority of the newly isolated methanol-utilizing strains in this study exhibited better growth at 37°C instead of 30 or 45°C. Moreover, Hyphomicrobium sp. FSA2 was the only strain capable of utilizing methanol even at elevated temperature 45°C, showing its adaptability to a wide range of temperatures. Differential carbon substrate utilization profiling revealed the facultative nature of all isolated methanol-utilizer strains with Xanthobacter sp. TS3, being an important methanol-utilizer capable of degrading toxic compounds such as acetone and ethylene glycol. Overall, our study suggests the role of nutrients and plant-microbial interaction in shaping the composition of methanol-utilizers in terrestrial environment.